Products

首页>Products>Controller>Analog Controller>LTS-2APC
Machine Vision Light
Custom Light
Controller
Line scan Light
Waterproof Light
Multi-angle Series

LTS-2APC

New analog controller easy to install with small volume; Have a 12V 500mA output to supply to camera. And it has the function of switching on/off mode, a common using power supply. Can be used in many applications.

Features：

1.Compact dimension, easy to install.
2.Luminance stepless adjustment.
3.Short-circuit protection function.
4.External trigger function.
5.Voltage display function.
6.Clear operation mark, easy to operate.
7.Have a 12V 500mA output to supply to other device.


Parameters

Item LTS-2APC2424
-1/2/4 		LTS-2APC2460
-1/2/4/6 		LTS-2APC24120
-1/2 		LTS-2APC24120
-8 		LTS-2APC24200
-1 		LTS-2APC24400
-1/2 		Remark
Number of channels 1、2、4 way 1、2、6 way 1、2 way 8 way 1 way 1、2 way
Single way Max.
Output power 		24W 48W 120W 24W 200W 400W
Total output
powe 		24W 60W 120W 120W 200W 400W
External trigger voltage  0-1.5V  0-1.5V  5-24V  0-1.5V  5-24V  5-24V External trigger function
Addition output voltage 12V output (Can power supply to camera) 500mA output This interface strictly prohibit reverse connected
Input voltage AC 100-240V 50/60HZ
Trigger delay time <80us
External trigger frequency ＜1/T Decide by time. Such as T=1mS, external trigger frequency Max. To 1K
Luminance control Stepless adjustment
Drive mode Constant-voltage drive, control the changes of voltage  
Normal on/Normal closed mode switch Build-in Switch by toggle switch TS


Control panel specification<LTS-2APC2424-2>

Connection step:

Step 1: connected the light and controller (Reference to the picture on the right).

Step 2: if need the external trigger control, please connect the external trigger signal with the controller trigger interface.

Step 3: connect power (AC100-240V 50/60 Hz), press the red switch “-”, indicator light up, “o” uplifted, power on.


Trigger port setup<LTS-2APC2424-2>

This series controller have high level trigger and low level trigger optional. This model is low level trigger. Total 2 group trigger ports, each has +/- mark. To input low level 0-1.5V to +/- port or +/- connected with short circuit can achieve the trigger function.

乐视科技

Trigger introduction: when output initial state is open mode, input low level to trigger port, light off; when output initial state is off mode, input low level to trigger port, light on.


wire connection method of the external trigger signal




Sequence chart


Specification: T1 is trigger delay time, T1≦80us T3≦80us.


Controller model

Product

Model

Voltage

Power

Number of channels

Remark

Analog controller

LTS-2APC2424-1

24V

24W

1

Have voltage display, trigger,and power supply to camera function

LTS-2APC2424-2

24V

24W

2

LTS-2APC2424-4

24V

24W

4

Have trigger, and power supply to camera function

LTS-2APC2460-1

24V

60W

1

Have voltage display, trigger, and power supply to camera function

LTS-2APC2460-2

24V

60W

2

LTS-2APC2460-4

24V

60W

4

Have trigger, and power supply to camera function

LTS-2APC2460-6

24V

60W

6

LTS-2APC24120-1

24V

120W

1

LTS-2APC24120-2

24V

120W

2

LTS-2APC24120-8

24V

120W

8

LTS-2APC24200-1

24V

200W

1

Have voltage display, trigger, and power supply to camera function

LTS-2APC24400-1

24V

400W

1

LTS-2APC24400-2

24V

400W

2


Boundary dimension(mm)