Products
>Products>Controller>Digital Controller
- LTS-2DPC
- New 2DPC series have compact structure, easy to install.Have a 12V 500mA output to supply to camera. Easy to operate, output high precision voltage, can provide high precision control to LED light. It can be controlled by button or RS232, realized 0-255 grade brightness adjustment. 2DPC series controller can be used as common LED light controller, and can achieve to trigger control also ( Trigger by RS232, or external trigger). 2DPCS series controller supply to lights which has high requirement of brightness control. It is preferred light controller to high-end machine vision system.
Features
1.Easy to operate, each channel can be controlled independently with high precision.
2.Digital display, button control, easy to understand.
3.Can communicate with PC by RS232.
4.With trigger, faster respond speed, high reliability.
5.Power off saving function.
6.Have a 12V 500mA output to supply to other device.
Communication parameter
Communication protocol RS232
Stop bit：1bit
Data format
word size
1 word size
1 word size
1 word size
3 word size
2 word size
Baud rate：9600bps
Odd-even check：NO
function
tagged word
command word
channel word
data word
xor check word
Parameters
Item
LTS-2DPC24##-#S
Remark
Communication mode
RS232
Luminance control mode
PWM adjust
Change PWM duty radio to adjust voltage
Trigger delay time
<1/T
Related to load
External trigger frequency
<50uS
Decide by time. Such as T=1mS, external trigger frequency Maximum To 1K
External trigger input voltage
High level 5-24V
Normal on/Normal closed mode optional
Number of channels
2、4、6、8 way
Luminance control
256 grade adjust
Addition output voltage
12V 500mA output Can power supply to camera
Wiring as requires, strictly prohibit reverse connected
Drive mode
Constant-voltage, adjust the luminance by changing the duty radio
Input voltage
100-240V
Control panel specification
<LTS-2DPC2460-4S>
Connection step:
Step 1: connected the light and controller (Reference to the picture on the right).
Step 2: if need the external trigger control, please connect the external trigger signal with the controller trigger interface.
Step 3: connect power (AC100-240V 50/60 Hz), press the red switch “-”, indicator light up, “o” uplifted, power on.
Step 4: If need to control the luminance by PC, please connect the PC with controller by RS232 data line in the power off status, then control by our demo program or the program you write yourself. Can set-up the each channel parameter manual when operated by serial port mode. That’s to say, the upper computer and controller all can set-up the parameter, no need mode swapping.
Mode setup
Mode
Output interface
Normal on lighting mode
Control by S button, when first of digital tube display 1/2/3/4, luminance of output interface connected light can be adjusted
H1 mode
Control by S button, when first of digital tube display H, third of digital tube display 1, output interface open
H0 mode
Control by S button, when first of digital tube display H, third of digital tube display 0, output interface close
Trigger port setup<LTS-2DPC2460-4S>
This series controller is high level trigger. Total 4 group trigger ports, each has +,- mark. To input high level to +,- port can achieve the trigger function.
Trigger introduction: when under the normal on lighting mode and H1 mode, input high level 5-24V to trigger port, light close. When under H0 mode, input high level 5-24V to trigger port, light on.
Wire connection method of the external trigger signal
Sequence chart
Normal on mode (H1 mode)：
When connect external trigger signal, trigger “+” input high level 5-24V “-” ground connection, light off.
Normal closed mode (H0 mode)：
When connect external trigger signal, trigger “+” input high level 5-24V “-” ground connection, light on.
Specification: T1 is trigger delay time, T1≦80us T3≦80us.
Controller model
Product
Model
Voltage
Power
Number of channels
Remark
Digital controller
LTS-2DPC2460-2S
0-24V
60W
2
Have communication, trigger, and power supply to camera function
LTS-2DPC2460-4S
0-24V
60W
4
LTS-2DPC2475-4S
0-24V
75W
4
LTS-2DPC2475-8S
0-24V
75W
8
LTS-2DPC24120-8S
0-24V
120W
8
LTS-2DPC24400-2S
0-24V
400W
2
LTS-2DPC48600-2S
0-48V
600W
2
Boundary dimension(mm)
