Products

>Products>Controller>Analog Controller

New analog controller easy to install with small volume; Have a 12V 500mA output to supply to camera. And it has the function of switching on/off mode, a common using power supply. Can be used in many applications.

Features：

1.Compact dimension, easy to install.
2.Luminance stepless adjustment.
3.Short-circuit protection function.
4.External trigger function.
5.Voltage display function.
6.Clear operation mark, easy to operate.
7.Have a 12V 500mA output to supply to other device.

Parameters

Item	LTS-2APC2424 -1/2/4	LTS-2APC2460 -1/2/4/6	LTS-2APC24120 -1/2	LTS-2APC24120 -8	LTS-2APC24200 -1	LTS-2APC24400 -1/2	Remark
Number of channels	1、2、4 way	1、2、6 way	1、2 way	8 way	1 way	1、2 way
Single way Max. Output power	24W	48W	120W	24W	200W	400W
Total output powe	24W	60W	120W	120W	200W	400W
External trigger voltage	0-1.5V	0-1.5V	5-24V	0-1.5V	5-24V	5-24V	External trigger function
Addition output voltage	12V output (Can power supply to camera) 500mA output						This interface strictly prohibit reverse connected
Input voltage	AC 100-240V 50/60HZ
Trigger delay time	<80us
External trigger frequency	＜1/T						Decide by time. Such as T=1mS, external trigger frequency Max. To 1K
Luminance control	Stepless adjustment
Drive mode	Constant-voltage drive, control the changes of voltage
Normal on/Normal closed mode switch	Build-in						Switch by toggle switch TS

Control panel specification<LTS-2APC2424-2>

Connection step:

Step 1: connected the light and controller (Reference to the picture on the right).

Step 2: if need the external trigger control, please connect the external trigger signal with the controller trigger interface.

Step 3: connect power (AC100-240V 50/60 Hz), press the red switch “-”, indicator light up, “o” uplifted, power on.

Trigger port setup<LTS-2APC2424-2>

This series controller have high level trigger and low level trigger optional. This model is low level trigger. Total 2 group trigger ports, each has +/- mark. To input low level 0-1.5V to +/- port or +/- connected with short circuit can achieve the trigger function.

乐视科技

Trigger introduction: when output initial state is open mode, input low level to trigger port, light off; when output initial state is off mode, input low level to trigger port, light on.

wire connection method of the external trigger signal

Sequence chart

Specification: T1 is trigger delay time, T1≦80us T3≦80us.

Controller model

Product	Model	Voltage	Power	Number of channels	Remark
Analog controller	LTS-2APC2424-1	24V	24W	1	Have voltage display, trigger,and power supply to camera function
	LTS-2APC2424-2	24V	24W	2
	LTS-2APC2424-4	24V	24W	4	Have trigger, and power supply to camera function
	LTS-2APC2460-1	24V	60W	1	Have voltage display, trigger, and power supply to camera function
	LTS-2APC2460-2	24V	60W	2
	LTS-2APC2460-4	24V	60W	4	Have trigger, and power supply to camera function
	LTS-2APC2460-6	24V	60W	6
	LTS-2APC24120-1	24V	120W	1
	LTS-2APC24120-2	24V	120W	2
	LTS-2APC24120-8	24V	120W	8
	LTS-2APC24200-1	24V	200W	1	Have voltage display, trigger, and power supply to camera function
	LTS-2APC24400-1	24V	400W	1
	LTS-2APC24400-2	24V	400W	2

Boundary dimension(mm)