Products
>Products>Controller>Digital Controller>LTS-2DPC
- · Ring Light
- · High Power Ring Light
- · Arc-shaped light
- · Ring Shadowless Light
- · Low Angle Shadowless Light
- · Milti-direction Shadowless Light
- · Flat Shadowless Light
- · Shadowless Dome Light
- · Combined Dome Ring Light
- · Flat Dome Light
- · Low Angle Square Shadowless Light
- · Square /Vault Light
- · High Power Bar Light
- · Bar Light
- · Multi-color Bar Light
- · Combined Bar Light
- · High Power Coaxial Light
- · Narrow Angle Coaxial Light
- · Right-angle Coaxial Light
- · New Coaxial Light
- · Coaxial Light
- · Multi-color Coaxial Light
- · Parallel Coaxial Light
- · Parallel Spot Light
- · Spot Light
- · Square/Ring Back Light
- · Ultrathin flank back light
- · High Power Back Light
- · Parallel Back Light
- · Customized Circular Back Light
- · Arc Flat Dome Light
- · Three-color Dome Light
- · Combined Light
- · High Power Bar Light
- · Custom Ring Light
- · Multi-color Ring Light
- · Four-side bar light
- · 定制回形背光源
- · Super Large Ring Back Light
- · Ultra-long Back Light
- · U-shape Back Light
- · Square Back Light
- · Parallel Square Back Light
- · Ultra High Brightness Back Light
- · LCD Surface Inspection Light
- · LTS-2DPC
LTS-2DPC
Features
1.Easy to operate, each channel can be controlled independently with high precision.
2.Digital display, button control, easy to understand.3.Can communicate with PC by RS232.
4.With trigger, faster respond speed, high reliability.
5.Power off saving function.
6.Have a 12V 500mA output to supply to other device.
Communication parameter |
Communication protocol RS232 |
Stop bit:1bit |
Data format |
word size |
1 word size |
1 word size |
1 word size |
3 word size |
2 word size |
Baud rate:9600bps |
Odd-even check:NO |
function |
tagged word |
command word |
channel word |
data word |
xor check word |
Parameters
Item |
LTS-2DPC24##-#S |
Remark |
Communication mode |
RS232 |
|
Luminance control mode |
PWM adjust |
Change PWM duty radio to adjust voltage |
Trigger delay time |
<1/T |
Related to load |
External trigger frequency |
<50uS |
Decide by time. Such as T=1mS, external trigger frequency Maximum To 1K |
External trigger input voltage |
High level 5-24V |
Normal on/Normal closed mode optional |
Number of channels |
2、4、6、8 way |
|
Luminance control |
256 grade adjust |
|
Addition output voltage |
12V 500mA output Can power supply to camera |
Wiring as requires, strictly prohibit reverse connected |
Drive mode |
Constant-voltage, adjust the luminance by changing the duty radio |
|
Input voltage |
100-240V |
Control panel specification
Step 1: connected the light and controller (Reference to the picture on the right).
Step 2: if need the external trigger control, please connect the external trigger signal with the controller trigger interface.
Step 3: connect power (AC100-240V 50/60 Hz), press the red switch “-”, indicator light up, “o” uplifted, power on.
Step 4: If need to control the luminance by PC, please connect the PC with controller by RS232 data line in the power off status, then control by our demo program or the program you write yourself. Can set-up the each channel parameter manual when operated by serial port mode. That’s to say, the upper computer and controller all can set-up the parameter, no need mode swapping.
Mode setup
Mode |
Output interface |
Normal on lighting mode |
Control by S button, when first of digital tube display 1/2/3/4, luminance of output interface connected light can be adjusted |
H1 mode |
Control by S button, when first of digital tube display H, third of digital tube display 1, output interface open |
H0 mode |
Control by S button, when first of digital tube display H, third of digital tube display 0, output interface close |
Trigger port setup<LTS-2DPC2460-4S>
This series controller is high level trigger. Total 4 group trigger ports, each has +,- mark. To input high level to +,- port can achieve the trigger function.
Trigger introduction: when under the normal on lighting mode and H1 mode, input high level 5-24V to trigger port, light close. When under H0 mode, input high level 5-24V to trigger port, light on.
Wire connection method of the external trigger signal
Sequence chart
Normal on mode (H1 mode):
When connect external trigger signal, trigger “+” input high level 5-24V “-” ground connection, light off.
Normal closed mode (H0 mode):
When connect external trigger signal, trigger “+” input high level 5-24V “-” ground connection, light on.
Controller model
Product |
Model |
Voltage |
Power |
Number of channels |
Remark |
Digital controller |
LTS-2DPC2460-2S |
0-24V |
60W |
2 |
Have communication, trigger, and power supply to camera function |
LTS-2DPC2460-4S |
0-24V |
60W |
4 |
||
LTS-2DPC2475-4S |
0-24V |
75W |
4 |
||
LTS-2DPC2475-8S |
0-24V |
75W |
8 |
||
LTS-2DPC24120-8S |
0-24V |
120W |
8 |
||
LTS-2DPC24400-2S |
0-24V |
400W |
2 |
||
LTS-2DPC48600-2S |
0-48V |
600W |
2 |
Boundary dimension(mm)